Congratulations!

Next steps:

STEP 1 – AUTHENTICATION

  • Contact support at support@traders-terminal.com to GET YOUR LICENSE and authenticate your copy of the software.
  • Please provide your:
    – First and Last Name (Billing)
    – Email 

STEP 2 – DOWNLOAD

Spotlight Platform X

Download

STEP 3 – User Guide

User Guide

Download (PDF)

PLATFORM X - AUTO MODULE

If you are going to use the PLX Auto Module please follow the steps below.

STEP 1 – GET FXBLUE.COM ACCOUNT

  • Enter your email, username and password
  • Click “Register”
  • Enter name (could be fake)
  • Enter mobile phone number (you must have access to it, as you will receive SMS)
  • Now on the screen you will see the following instructions (see image below)
  • You will receive SMS containing an email address, to which you have to send an email
  • Send an email to the address that you have received in the previous step. Subject/content is not important. Just enter anything.
  • Done.

Now that you have an account, follow the steps below.

STEP 1 – DOWNLOAD THE RECEIVER SOFTWARE

  • Go to https://www.fxblue.com/internet-trade-mirror/ 
  • Click “Log in/Register” (if required) and LOGIN
  • If you are already logged in, navigate to the “RECEIVER” tab/button. 
  • Click MT4 or MT5, depending on which platform you use.
  • Don’t forger to go over the User Guide and familiarize yourself with the copy trading software.

STEP 2 – INTALL THE RECEIVER

  • Close your MT4/MT5 platform
  • Open the FxBlueTradeMirrorReceiver.zip file.
  • Open the only file that is inside and restart “FX Blue Trade Mirror Receiver for MT4/5 Setup.exe” 
  • After the installation is completed, you may run the mt4/mt5 platform.

STEP 3 – CONNECT THE RECEIVER TO THE SENDER

  • Open the FxBlueTradeMirrorReceiver.zip file.
  • Open the only file that is inside and restart “FX Blue Trade Mirror Receiver for MT4/5 Setup.exe” 
  • After the installation is completed, you may run the mt4/mt5 platform.

STEP 4 – SET UP THE RECEIVER

  • Load the FX Blue Receiver to any chart.
  • Make sure Algo Trading is allowed in the Common Tab.
  • On the very top you have to fill in these 4 settings
  • Channel: plxauto
  • MessageServer: Europe
  • Username: your FX Blue user name
  • Password: your FX Blue password
 
  • The final required is for the SP500 symbol. The FX Blue trade copier automatically recognizes Forex Pairs, however for every other instrument it might be needed to further clarify. 
 
Here is the example and explanation from the User Guide:
” Non-fx markets require entries in the CustomSymbolMappings list. This tells the copier how to translate from symbol names on the sender account to symbol names on the receiver account. For example, if the sender’s name for the S&P 500 index is SPX500 and the receiver’s version is .US500, then the entry to add to CustomSymbolMappings is:
SPX500=.US500 “
 
What you have to do now is check the exact spelling of SP500 on your broker and fill in the CustomSymbolMappings. The example below could be read as follows:
– Sender’s SP500 = [SP500] (this is admiral markets)
– Receiver’s SP500 = SPX500 (this is Osprey MT5).
 
Basically you have to replace the second one, after the equal sign with whatever SP500 is abbreviated in your broker.
[SP500] = XXXXX

 

That’s all!


 

IF YOU HAVE ANY QUESTIONS OR YOU ARE NOT SURE HOW TO SET IT UP YOURSELF, DON’T HESISTATE TO CONTACT US.

 

 

Email Support: support@traders-terminal.com
Contact me directly in telegram: https://t.me/yordan_k

 

 

STILL TRADING ALONE?

Trading doesn’t have to be a lonely job. Get your FREE account and join the Traders Terminal community.

Get Free Account